Videos

Lazer Lamps Linear-18 Standard LED light - wide-angle

399.00 € + VAT ( 506.73 € )
Availability: In stock
Manufacturer:
Model: 0L18-LNR
• Economical solution for everyday road use
• Vacuum-metallised optics deliver wide spread of light
• Reduced up/down spread of light suits lower mounting positions
• Highly efficient 3W LED technology
• Sleek, low profile design facilitates installation
• Electronic thermal management
• ‘Unbreakable’ and hardcoated polycarbonate lens
• ECE approved for on-road use
• IP67 watertight
• 5 year warranty
• Supplied with male/female connectors (pre-wired)
• Designed & manufactured in Britain

Description

Responsive imageThe Linear-18 is an ECE approved, road-legal versatile and economical auxiliary lighting solution which provides a significant upgrade when compared with any OE headlamps. The Linear-18 is ideal for passenger vehicles, where regulations allow for a single lamp to be connected direct to the standard high beams, and in particular where the lamp is being mounted low down at the front of the vehicle.

• Utilising highly efficient 3W LEDs, the Linear-18 delivers 6,750 lumens, and 1 Lux to 428m, impressive performance considering the lamp only consumes minimal power at 63W and with a current draw of 4.4Amps. The light distribution can be best described as ‘wide’ which taking nothing away from the enviable distance illumination, does provide for a comfortable left/right spread of light, with a comparatively lower up/down spread (when compared to the equivalent ST or Triple-R product), that makes the Linear-18 especially well suited to lower install positions, such as vehicle grille or number plate mounting.

• At 532mm in length, and with an aluminium body measuring just 40mm in height, and weighing a little over 1kg, this is an auxiliary LED light that can be subtly integrated onto any everyday road vehicle without compromising the vehicle aesthetics. A borderless 'unbreakable' polycarbonate front lens, with hardcoat lacquer, allows for improved aero performance and prevents build-up of ice/snow/dirt that might otherwise interfere with the light distribution. Automotive grade corrosion resistance, alongside stainless steel brackets and fasteners, ensures the high-end styling of the lamps themselves stays in prime condition for many years to come.

Lazer Lamps Centre mount clamp - Linear

from 11.00 € + VAT (13.97 €)
In stock

Lazer Lamps Tube clamp pair - 76mm, black

45.00 € + VAT (57.15 €)
In stock

Lazer Lamps License plate mount

23.00 € + VAT (29.21 €)
In stock

Misutonida Tube clamp pair - black - 63mm

69.00 € + VAT (87.63 €)
In stock

Lazer Lamps Bumper beam mounting kit

55.00 € + VAT (69.85 €)
In stock

Lazer Lamps Stay bar kit - Linear

from 11.00 € + VAT (13.97 €)
In stock

Lazer Lamps accessory - CAN contactless reader

99.00 € + VAT (125.73 €)
Production time 3 weeks

Specification

What's included:

• x1 Linear-18 LED Lamp
• x1 Side Mount (1126k)
• x1 Wiring and Installation Instructions

 
Technical data:
 
Voltage Range 9-32V
LED Life 50,000 hours
Weight 1090 gr
HIGH BEAM FUNCTION
Total Luminous Flux 6750 Lm
Number of High Output LEDs 18
Power Consumption 63 Watts
Current Draw (at 14.4V) 4.4 Amps
Start-up Time * 100 ms
CERTIFICATION
High Beam ECE R112
ECE Reference 30
DIMENSIONS
Width 532 mm
Depth 62 mm
Height 40 mm
PHOTOMETRIC DATA
0.25 lx Line 855 metres
0.5 lx Line 605 metres
1 lx Line 428 metres
3 lx Line 247 metres
BEAM SPREAD
Horizontal 34 degree spread
Vertical 11 degree spread
 
* 'Start-up time' is the delay between the lamp receiving voltage, and light being emitted. Different Lazer lamps have different start-up times, depending on their electrical architecture, so we recommend that if you are buying two different types of Lazer lamp, for mounting on to the same vehicle, that you ensure you pick products with matching start-up time (either 5ms or 100ms, depending on the product). Please check the lamps technical section on each product page to be sure you are purchasing lights with the same start-up time for the best performance.